Safe, reliable lithium iron phosphate (LiFePO₄) energy storage, repackaged by LumenCache for easy on-site integration. By delivering a DC-native solution, builders can rightsize the battery for code compliance (including Title 24) in a plug-and-play, easy-to-commission, and cost-effective way. Long cycle life and maintenance-free design make it ideal for modern building systems.

Use Cases:
• Backup power for emergency and exit lighting
• Critical resilience during major outages: power, security cameras, ventilation, lighting, access control, and more
• Ensuring buildings continue operating seamlessly during grid failures — no glitches, no blips
• Integration with solar or DC-ready building systems for optimized energy storage

Drop-in internet access to LibRE systems.

Accessory Power Regulator. 12W Use only if an EGW is attached to the PDM or there are over 10 L3-TPs attached to the PDM.

Accessory Power Regulator. 6W

Communication Bus Adapter to connect to another enclosure over Cat5

Constant Current Driver, Dimmable, 30W, Output: 75/150/300/600mA, 9-60Vdc LED Vf

Switch/Keypad Input and 1 Zone PDM controller, Dimming, Communicating

Switch/Keypad Input and 1 Zone PDM controller, Dimming, Communicating

15in x 28in tall LibRE enclosure. Not standard stud width. Recommend SnapOne enclosure

Locking Door for L2-ENC-28 LibRE enclosure

2x 80mm fans and PCB for L2-ENC-28-DOOR.

Power Distribution Unit 16 Port

SIB-K One RJ45 jack connection to LED +/-, 4pin JST connector for accessory connections

Smart Interface Block, Series LED power circuit, no case

Switched Voltage Driver for STRIPS, Dimmable, 50W, 24-48V, 1.2A, High-side Switch

Basic switch input module. No communications, no dimming.

Enclosure Wiring Harness for 1-4 PDM & AC/DC Supply

Smart Interface Block, Parallel LED power circuit, snap case. Common Anode(+) for CCT

Wall TouchPad, 4 button, 1111 layout, Decora

Wall Switch, Decora shape