Skip to Content

Platform

3BR Home Starter Kit
High quality starter pack designed for production home builders to delivery an amazing lighting and control package within their AC budget. Single family home with 3 bedrooms, 2 bathrooms, kitchen, dining room, living room, entry, hall and outdoor deck.

Included:
• 1 x 600W AC/DC (50% spare capacity)
• 1 x PowerPlane4
• 3 x PDM (6 unused ports)
• 8 x 6in Lights CCT
• 16 x 4in Lights CCT
• 1 x 10w/m LED Strip 5m CCT
• 14 x WK-D Switches
• 5 x SV Driver
• 13 x CC Driver
• 8 x 7W A19 E26 Bulbs
• 5 x SIB-P-SV

Not Included:
• Cat5 Wires
3,202.76 3202.76 USD
6x6 Lighting Kit
Complete lighting system snaps into existing low voltage wiring enclosure is ready for your TinyHome or ADU. 6 Lights, 6 Switches, 6 Sets of Cat5 wire, 6 driver cards, 1 PDM, 1 PowerPlane-2, 1 AC 240W power supply.
699.00 699.0 USD
L2-APM
Drop-in internet access to LibRE systems.
78.80 78.8 USD
L2-APR-12W
Accessory Power Regulator. 12W Use only if an EGW is attached to the PDM or there are over 10 L3-TPs attached to the PDM.
64.00 64.0 USD
L2-APR-6W
Accessory Power Regulator. 6W
45.00 45.0 USD
L2-CBA
Communication Bus Adapter to connect to another enclosure over Cat5
8.00 8.0 USD
L2-CC
Constant Current Driver, Dimmable, 30W, Output: 75/150/300/600mA, 9-60Vdc LED Vf
28.00 28.0 USD
L2-DM
Switch/Keypad Input and 1 Zone PDM controller, Dimming, Communicating
68.00 68.0 USD
L2-EGW
Switch/Keypad Input and 1 Zone PDM controller, Dimming, Communicating
42.00 42.0 USD
L2-ENC-28
15in x 28in tall LibRE enclosure. Not standard stud width. Recommend SnapOne enclosure
100.00 100.0 USD
L2-ENC-28-DOOR
Locking Door for L2-ENC-28 LibRE enclosure
55.00 55.0 USD
L2-ENC-FANKIT
2x 80mm fans and PCB for L2-ENC-28-DOOR.
25.00 25.0 USD
L2-PDM
Power Distribution Unit 16 Port
210.00 210.0 USD
L2-SIB-K
SIB-K One RJ45 jack connection to LED +/-, 4pin JST connector for accessory connections
2.50 2.5 USD
L2-SIB-SE
Smart Interface Block, Series LED power circuit, no case
3.00 3.0 USD
L2-SV
Switched Voltage Driver for STRIPS, Dimmable, 50W, 24-48V, 1.2A, High-side Switch
12.00 12.0 USD
L2-SW
Basic switch input module. No communications, no dimming.
25.00 25.0 USD
L2-WH-A
Enclosure Wiring Harness for 1-4 PDM & AC/DC Supply
80.00 80.0 USD
L3-SIB-P
Smart Interface Block, Parallel LED power circuit, snap case. Common Anode(+) for CCT
3.00 3.0 USD
LibRE Dealer Kit Refresh to Construction Lighting Kit
Replace/refresh your LibRE (or Legacy) dealer kit with a brand new ReNetA Construction Lighting kit for just $99 plus the cost of shipping. Kit validation required. Receive a coupon for $100 in credit for any ReNetA products. Limit 1 per customer with LibRE demo kit. Connects to any 12-48VDC supply including cordless tool battery adapters. Includes:

(1) PPC-2-DCDC-1224-240W_R(1)
(1) CPDB-8_RJ1F(485.1)
(2) F0001-000-44W-000_J1FS(485.1)
(3) F0002-000-05W-000_J1FS(485.1)
(1) SW-D_J(485.1) (WH: White)
(4) Cat6 23AWG Bootless Patch Cable, Plenum, Tipped and Tested (25ft)
(2) Cat6 23AWG Bootless Patch Cable, Plenum, Tipped and Tested (5ft)
(1) $100 Credit for ReNetA products
641.61 641.61 USD